Water on autopilot with soaker hoses

An hour · Easy · 6 steps

Soaker hoses and a faucet timer water your beds deeply every few days, whether you're home or not.

Soaker hoses on a timer: the faucet, the bed, and a slice through the soil
Section4–6 in≈1 ft12345678

Fig. Soaker hoses on a timer: the faucet, the bed, and a slice through the soil.

  1. Faucet timer
  2. Pressure regulator
  3. Garden hose from the faucet
  4. Soaker hose, lines about a foot apart
  5. Garden staples pin it down
  6. End cap
  7. Straw mulch over the hose
  8. Water spreads 4 to 6 inches deep

What you'll need

Amazon links are affiliate links: we may earn a small commission, at no extra cost to you.

You'll also need

  • A regular garden hose to run from the faucet to the bed

Steps

  1. Screw the timer onto the faucet, then the pressure regulator, then the garden hose.
  2. Lay the soaker hose along each row, or snake it through the bed in lines about a foot apart. Pin it down with garden staples.
  3. Cap the far end of the soaker hose (most come with a cap).
  4. Turn the water on and let it run for 30 minutes. Then dig down beside a plant: the soil should be moist 4 to 6 inches deep. Run it longer or shorter until it is.
  5. Set the timer to run that long every 2 to 4 days, early in the morning.
  6. Cover the hoses with a few inches of straw. Mulch keeps the water in the soil and the sun off the hose.

Tips

  • In hot, dry weeks, water more often, not longer.
  • Skip a day after a good rain. A rain gauge tells you how much fell.
  • Drain the hoses and bring the timer in before the first hard freeze.